速腾自动挡车如何正确使用 速腾自动挡正确起步和停车步骤

Hello, today I will share some knowledge about how to correctly use the speed and automatic gear of the Sagitar. This includes explaining the correct starting and parking steps for the automatic gear of the Sagitar. The article may be a bit long, but if it happens to solve the problem you are facing, don't forget to follow this site. Let's start right away!

How to drive the automatic gear of Sagitar

The driving steps for the automatic gear of the Sagitar are as follows:

1. P gear: Parking lock position (handbrake). When the gear lever is moved to this position, the driving wheels are mechanically locked. The gear lever can only be moved to this position when the car is stopped. When moving the gear lever out of this position, you must step on the brake pedal and turn on the ignition switch.

2. R gear: Reverse gear. When reversing, move the gear lever to this position. The gear lever can only be moved to this position when the car is completely stopped. Then lightly step on the accelerator to reverse.

3. N gear: Neutral gear. When the gear lever is moved to this position, the gearbox does not engage any gear, and there is no power transmission to the wheels. The engine's braking function cannot be utilized, allowing the vehicle to enter a free moving state.

4. D gear: Forward gear. When the gear lever is moved to this position, the gearbox automatically shifts up or down within the engine speed range by stepping on the brake pedal or accelerator, and the shift point depends on the engine load, driver's driving style, and vehicle speed.

5. S gear: Sport shifting position. When the gear lever is moved to this position, the gearbox automatically shifts up or down within a higher engine speed range than the D gear, fully utilizing the engine's power. The shift point depends on the engine load, driver's driving style, and vehicle speed.

In the process of driving an automatic gear car, the computer automatically adjusts the clutch based on the speed, so there is no need for manual intervention. Therefore, automatic gear cars do not have a clutch pedal, only a brake and accelerator. In manual mode, the clutch is also controlled by the computer, and the driver only needs to shift up and down.

Correct starting and parking steps for the automatic gear of Sagitar

Hello, here are the parking steps for automatic gear cars:

1. When the car stops, decelerate first, step on the brake, move to the N gear. Here, don't switch directly to the P gear and turn off the engine, in order to avoid the gearbox passing through the R gear while the engine is running, reducing the impact.

2. Turn off the engine. At this time, the power is not disconnected because it is not in the P gear, so the key cannot be removed.

3. Pull the handbrake tight, release the foot brake. You can feel the force applied to the handbrake. After the car is stationary, switch to the P gear to avoid applying force to the P gear.

4. Disconnect the power and remove the key.

I hope this can help you!

Driving methods for automatic gear of Sagitar

1. The tutorial for driving Sagitar automatically is: insert the key into the ON position, step on the brake, then shift to the N gear, start the ignition, and then shift to the D gear, release the brake, and lift the foot brake to start.

2. D gear is the forward gear. After switching to this gear, the driver only needs to control the accelerator pedal to control the speed.

3. N gear is neutral gear, which is generally used for short-time parking or waiting at traffic lights. But in order to avoid slipping, you must step on the brake after shifting to neutral. If the time is slightly longer, you can shift to neutral, pull down the handbrake, and then rest your foot.

4. R gear is the reverse gear. Since automatic gear cars can use the semi-linkage like manual gear cars, the accelerator pedal must be controlled well.

5. Generally, if you want to shift to the R gear, you must press the safety button on the gear lever.

6. When parking, step on the brake. When the car stops, pull down the handbrake, shift to the P gear, lift the foot brake, and remove the key.